 printable version
Removing and installing the trailing arm and repair
You will need: the keys "12", "14", a stripper silent blocks. 1. Place the vehicle on a lift or a viewing ditch. |
| | 2. Remove the two nuts bracket the parking brake cable to the rear suspension trailing arm and take the cable side. | 3. Remove the trailing arm bolt to the hub knuckle rear suspension ... |
| | 4. ... remove the bolt and washer. | 5. Remove the bolt arm to the bracket body ... |
| | 6. ... and remove the bolt. | 7. Remove the rear part of the lever to the hub knuckle. |
| | 8. Display the front part of the trailing arm of the bracket body ... | 9. ... and remove the lever. |
| | 10. Carefully inspect the lever arm deformed replace. Signs of deterioration are silent blocks breaks unilateral buckling and peeling the rubber from the metal sleeve. To replace the silent blocks you need pullers suitable size. | 11. Extract the puller lugs of the lever of the Hob. |
12. Press in the lever in eyelet New Hob, set the lever in the reverse order, taking into account the following: |
- Before installing the lever on the rear knuckle bushing sleeve grease with a thin layer of grease; - Finally tighten mounting the trailing arm to the knuckle arm and the body only on the car standing on the earth;
| 
