REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Kia Spectra (2004 release)

general info. full specifications. diagnostics. hints. tips. tricks

Home

Kia
	Spectra
		Device Car
		Operating Guidelines
		Faults in the way
		Maintenance
		Engine
		Transmission
		Chassis
			Front suspension
			Rear suspension
				Design Features
				Troubleshooting rear suspension, their causes and remedies
				Removing and installing strut rear suspension
				Repair strut rear suspension
				Replacing the top support strut rear suspension
				Removing and installing the trailing arm and repair
				Removing and installing wishbone and repair
				Replacement parts stabilizer bar rear suspension
				Replacing the rear hub
				Replacing the wheel mounting studs
		A steering
		The brake system
		Electrical
		Body
		Car Care
		Purchase of spare parts
		A trip to the STO
		Winter car operation
		Preparation for technical inspection
		Applications
		Diagrams

printable version

Replacement parts stabilizer bar rear suspension

You will need: the keys "14", "15" face head "14" extender knob.

1. Place the vehicle on a lift or a viewing ditch.


2. To replace the anti-roll bar, unscrew the nut of the ball pin stabilizer to the stabilizer bar, hold the second key ball stud from turning.	3. Remove the bolt anti-roll bar to the support strut ...


4. ... remove the bolt ...	5. ... and remove the rack.

6. Similarly remove the second the stabilizer.


7. To replace the rubber plug rod stabilizer bar remove the bolt bracket stabilizer bar rear suspension crossmember to ...	8. ... and remove the bracket.

Replacement parts stabilizer bar rear suspension

9. Remove the split bushing with stabilizer bar.

10. Similarly remove the second grommet ...

11. ... and remove the stabilizer bar.

12. Check the anti-roll bar for deformation and damage.

13. Install the stabilizer bar parts in reverse order of removal. The final nuts and bolts stabilizer bar is carried out only on the car standing on the earth.

14. Check and adjust the angles of the rear wheels (see. "Check and adjust wheel alignment").

« previos page
Removing and installing wishbone and repair

next page »
Replacing the rear hub