printable version
Removing and installing starter
The starter clutch housing mounted on the rear side of the power unit. You will need: the keys "13", "14". 1. Disconnect a wire from the plug ?�-?� the storage battery. |
| | 2. Remove the four screws on the support bracket inlet pipe ... | 3. ... and remove the bracket. |
| | 4. Disconnect the harness from the control terminal of the traction relay. | 5. Remove the protective cap ... |
| | 6. ... unscrew the nut of the power line and remove the wire from the contact bolt traction relay. | 7. Remove the top two ... |
| | 8. ... and one lower bolts ... | 9. ... and remove the starter. |
10. Install the starter in reverse order of removal. |
|