printable version

Features of operation of vehicles equipped with a manual gearbox (Manual)

At issue in the present manual car set 5-speed Manual transmission. The shift lever has a floor location and placed on the lower section of the center console.

When changing gears fully depress the clutch pedal, and then slowly release it.

Manual transmission equipped with a mechanism that prevents accidental switching from fifth gear to reverse gear - to include the latest gear lever must first be converted into position ?�N?�.

Reverse gear must be done only after a full stop of the car!

In order to prevent premature wear and damage to the clutch components should not while driving to keep your foot on the clutch pedal. Also, do not use the clutch pedal for temporarily holding the vehicle on the rise, for example, while waiting for an enable signal light.

Before leaving the vehicle do not forget to cock the parking brake and turn off the engine, followed by the installation Manual transmission on the first / reverse gear!

Recommended speed ranges on individual programs listed in the Specifications of the Head Controls and operation receptions. When their car will be subject to move smoothly and consume a minimum amount of fuel. In order to increase the impact motor, such as when overtaking or climbing hills, upshifts can be produced with a delay, i.e. at higher velocities / engine speeds - Do not allow the tachometer needle approaches highlighted in the red range of the scale.

By reducing the speed of the switch to a lower gear should not be waiting for a significant reduction of return of the engine. Timely switch to downshift minimizes the risk of stopping the engine and provides the required intake, if necessary subsequent acceleration. When driving on a steep descent switch to downshifting helps keep a safe speed mode and allows you to maximize the life of the components of brake mechanisms.