Maintenance worn cards ?�Advanced Key?�

Make sure the battery is correctly oriented with their electric poles relative to the body map. Improper installation of the battery electrolyte to flow. When replacing the battery, be careful not to bend the electrical contacts, as well as expose the electrical contacts of the oil contamination. Make sure that the remote control housing no dirt. It can bring the console unusable. If a replacement is carried out correctly, there is danger of an explosion of the battery. Replace only with batteries of the same type (CR2025 or completely equivalent elements). When disposing of end-of-battery, observe the following rules:

- Insulate the positive and negative poles of the battery using cellophane tape, or;

- Do not disassemble;

- Do not throw batteries into fire or water;

- Do not deform or crush the battery.

To avoid failure of worn cards ?�Advanced Key?� Replace the battery only service station official dealer of Mazda. With replaceable battery, perform the following steps:

1. Remove the auxiliary key from the map;

2. Use a flathead screwdriver to loosen the battery cover, then turn and remove it (Fig. 1.16);

3. Insert the tip of a flathead screwdriver into the slot and remove the battery;

4. Insert the new battery (type CR2025 or its equivalent it completely) so that the Positive (+) located on the same side as the marking (+) applied to the lid;

5. Rotate and close the lid.

In case of loss or theft of cards worn immediately contact a station official Mazda dealer for replacement and blocking action lost or stolen card. It is necessary to bring along all the remaining cards have worn ?�Advanced Key?�.