add to favorites contacts sitemap
REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Mazda 3 (2003 release)

general info. full specifications. diagnostics. hints. tips. tricks
Mazda 3
Home
 
Mazda
3
Operation and maintenance of car
Engine
General description new engines models L8, LF, L3
The mechanical part of engines
Appendix 1
Annex 2
Appendix 3
Engine Z6 - mechanical part
Lubrication system
Cooling system
Intake system
Fuel system
Removal and installation of the block of the fuel pump
Withdrawal
Setting
Check fuel leakage after installing the pump unit
Removal and installation of the fuel injector
Exhaust and Emission
Ignition system
Control system
Tables
Transmission
Chassis
Steering Gear
Brakes
Onboard electric
Body
 


Hit Counter by Digits


print page printable version

Setting



NOTE
If the gasket is gasoline, the fuel pump unit will rotate and can not be mounted in the specified position.
Thoroughly wipe off all gasoline from the pad.



The combination of adjusting labels on the fuel pump and fuel tank
Fig. 2.323. The combination of adjusting labels on the fuel pump and fuel tank


Align the timing marks on the fuel pump and the fuel tank, as shown in Figure 2.323.
Install special tool.
Using a special tool, tighten the fuel pump within the specified torque, preventing the displacement of adjusting labels.
If the specified torque can not be achieved, replace the fuel pump gasket.
If the specified torque can not be obtained after replacing the cover of the fuel pump and gaskets, replace the fuel tank.
Tightening torque cap of the fuel pump: 80-90 Nm.




« previos page
Withdrawal
next page »
Check fuel leakage after installing the pump unit

Copyright © 2010 AutoManuals.biz. Trademarks belong to their respective owners. All rights reserved.