printable version
Withdrawal
Knock locknuts hook portion out small chisel and a hammer (Fig. 3.103). Lock hub on the brakes. Loosen the lock nut.
| Fig. 3.104. Removing the wheel hub to the drive shaft
|
Place the hub assembly in a vise. Remove the wheel hub to the drive shaft using special tool (Fig. 3.104). If the inner ring of the bearing on the left axis of the hub, cut bearing inner ring to a residual thickness (about 0.5 mm).
Remove the wheel bearing by using the special tool (Figure 3.106).
NOTE Bolts hub should be removed only in case of replacement. |
|