REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Mazda 3 (2003 release)

general info. full specifications. diagnostics. hints. tips. tricks

Home

Mazda
	3
		Operation and maintenance of car
		Engine
		Transmission
		Chassis
		Steering Gear
		Brakes
			Overview
			brake system
				Check and adjust the braking system
				Checking the brake fluid hydraulic drive braking system
				Removal of air from brake system
				Check the check valve vacuum hose (brake booster)
				Removal and installation of the vacuum hose (brake booster)
					Check the brake pedal
						Check the height of the brake pedal position
						Adjusting the height of the brake pedal position
						Check clearance of the brake pedal
						Adjustment of a backlash brake pedal
						Backlash check pedal-floor
						Checking the brake switch signal
				Removing and installing brake pedal
				Removal and installation of the main brake cylinder
				Check the fluid level sensor
				Removing and installing brake servo
				Check the brake servo
				Dismantling and assemblage of the master cylinder
				Removing and installing front brake disc
				Replacing the front brake pads
				Removing and installing rear disk brake
				Checking the parking brake system
				Removal, check and installation of the rear wheel speed sensor ABS
				Removal and installation of the hydraulic unit Anti-lock brake system
			Tables
		Onboard electric
		Body

Adjusting the height of the brake pedal position

Loosen the lock nut B and turn the bolt to lock into the pedal.

Loosen the lock nut D and turn the rod C to adjust the height.

Tighten the bolt with a lock nut B.

The inhaling moment: 9,8-14,7 Nm.

Fig. 6.15. Check the height of the brake pedal position

After adjustment, check the clearance of the pedal and the brake operation (Fig. 6.15).