Setting

Remove rust and dirt from the contact surface of the brake disc and wheel hub.

Align the marks made before removal and install the brake disc on the wheel hub.

Install the brake pad (outer side) is supported.

Clean the exposed portion of the piston.

Slowly rotating piston clockwise using a special device to drown him completely inside (Fig. 6.54).

Align the spring brake pad (inside) with the groove of the piston, and insert it in the direction of the arrow (Fig. 6.55).

Install the brake pad (inside) in the caliper.

Install the remaining components in the reverse order of removal.

After installation, repeatedly press the brake pedal and check the following:

- Stroke handbrake lever;

- Tacking brakes.