add to favorites contacts sitemap
REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Mazda 3 (2003 release)
general info. full specifications. diagnostics. hints. tips. tricks
 Mazda 3
Home
 
Mazda
3
Operation and maintenance of car
Engine
Transmission
Chassis
Steering Gear
Brakes
Overview
brake system
Check and adjust the braking system
Checking the brake fluid hydraulic drive braking system
Removal of air from brake system
Check the check valve vacuum hose (brake booster)
Removal and installation of the vacuum hose (brake booster)
Removing and installing brake pedal
Removal and installation of the main brake cylinder
Check the fluid level sensor
Removing and installing brake servo
Check the brake servo
Dismantling and assemblage of the master cylinder
Removing and installing front brake disc
Replacing the front brake pads
Removing and installing rear disk brake
Checking the parking brake system
Adjusting the parking brake system
Removal, check and installation of the rear wheel speed sensor ABS
Removal and installation of the hydraulic unit Anti-lock brake system
Tables
Onboard electric
Body
 


Hit Counter by Digits


print page printable version

Adjusting the parking brake system



Start the engine and click a few times on the brake pedal.
Stop the engine.
Remove the center console behind the ashtray.

Adjusting nut handbrake
Fig. 6.57. Adjusting nut handbrake


Turn the adjusting nut as shown in Figure 6.57.
After the adjustment, do the following:
- Turn the ignition key is ON, pull the parking brake lever on one click, and make sure the warning light illuminates the parking braking system;
- Make sure that the rear brakes do not lock the wheels.




« previos page
Checking the parking brake system		 next page »
Removal, check and installation of the rear wheel speed sensor ABS

Copyright © 2010 AutoManuals.biz. Trademarks belong to their respective owners. All rights reserved.