 printable version
Withdrawal
Disconnect the negative battery cable. Discharge the refrigerant. Drain the engine coolant. Uncover the air intake system. Remove the air duct intake system (Z6). Remove the air filter (LF). Remove the splash shield. Drain the hydraulic fluid of an automatic transmission (model with automatic gearbox). Disconnect the cooler (top) and cooler hose. Do not allow residues of the Strait of compressor oil cooling circuit of the line.
ATTENTION Contact with moisture or impurities in the cooling circuit, the cooling circuit capacity will be reduced, as abnormal noise is heard. Always close the caps open fittings after removing any elements of the cooling circuit. |
Disconnect the radiator hose from the radiator. Disconnect the hose from the oil cooler (model with automatic gearbox). Remove the cooling fan. Remove the oil cooler (model with automatic gearbox). Remove the radiator with installed capacitor. Take the hook and pull the radiator condenser, be careful not to spill the remaining oil from the condenser.
| 
