add to favorites contacts sitemap
REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Mazda 3 (2003 release)
general info. full specifications. diagnostics. hints. tips. tricks
 Mazda 3
Home
 
Mazda
3
Operation and maintenance of car
Engine
Transmission
Chassis
Steering Gear
Overview
General checks
Working with a steering operation
Precautions with the system of passive safety (SRS)
Removal, check and installation of the steering wheel and steering column
Disassembly of the steering mechanism and steering rods
Dismantling steering rod
Dismantling the pinion shaft and housing
Dismantling of the upper bearing and seals
Dismantling the gland inner guide
Check the steering gear and steering rods
Removing and installing power steering pump
Tables
Brakes
Onboard electric
Body
 


Hit Counter by Digits


print page printable version

Dismantling of the upper bearing and seals



Removal of the gland and the upper bearing
Fig. 5.23. Removal of the gland and the upper bearing


Install special tool as shown in Figure 5.23.
Using a press, remove the gland and the upper bearing, without applying pressure to the edge of the valve body.

Removal of the housing
Fig. 5.24. Removal of the housing


Cut the deformed area of the drill (Fig. 5.24).

ATTENTION
Carefully remove the holder, taking care not to damage the U-shaped gasket.

Disassemble holder.




« previos page
Dismantling the pinion shaft and housing		 next page »
Dismantling the gland inner guide

Copyright © 2010 AutoManuals.biz. Trademarks belong to their respective owners. All rights reserved.