Removal and installation of the block of the front door

Remove the front door glass.

Remove the internal handle.

Remove the front door speaker.

Disconnect the power window motor connector to the servo actuator connector front door lock, door mirror connector.

Remove the door wiring harness from the front door of the block.

Remove the bolts.

Remove the screw.

Remove the hook actuator front door of her block.

Pull the block to the front door a little to himself, not giving the regulator window servo snap to it, remove the unit from the door (Fig. 8.28).

Remove the inner cable handle and the door lock button cable from the hole.

Remove the power window motor servo controller and servo window to block the door (Fig. 8.29).

Install in the reverse order of removal.