printable version
Withdrawal
Remove the drive chain timing. Remove the pipe bracket and the EGR valve Remove the front sensor heated oxygen concentration Remove the accelerator cable and bracket Remove the fuel hose and the fuel injector harness Remove the air hose, the throttle pipe and intake manifold Disconnect the following elements: - Connector rear oxygen concentration sensor heated; - The basic muffler. Remove the three-way catalyst. Remove the upper radiator hose. Remove the radiator hose heater.
| Fig. 2.271. Order of easing of bolts camshaft bearing cap
|
Loosen the cover bolts camshaft bearing in 2-3 passes in the order shown in the diagram (Fig. 2.271). Remove the camshaft bearing caps.
| Fig. 2.272. Order of easing of bolts of the cylinder head
|
Loosen the bolts of the cylinder head in 2-3 passes in the order shown in Figure 2.272, and remove them.
|