 | Separate characteristics are resulted also in the text of the Head and in case of compulsion of their performance are shown in bold |
|
Common parameters |
Lubrication of drive shafts |
Inner CV joints, c | 100 |
The outer CV joint, c | 100 |
When replacing the protective cover of the hinge, if necessary, add grease. |
Differential | 1.1 liters of oil for hypoid gears SAE85W90 CF-235.7 or "BP Energear MBE?� |
The angle between the axes (in brackets for the four-wheel drive models 4MATIC) |
Transmissions and front propeller shaft, hail. | -0.5 ... + 0.67 (-0.6 ... -1.1) |
The front and rear propeller shaft, hail. | + ... 0.17 +1.0 (-0.6 ... +0) |
The rear propeller shaft and differential degrees. | -0.83 ... -0.17 (-0.1 ... -0.9) |
The diameter of the drive gear differential, mm | 185 or 198 |
The gear ratio of the main transmission |
2.65 (45:17) | |
2.87 (43:15) | |
3.27 (36:11) | |
3.27 (49:15) | |
3.46 (45:13) | |
Efforts of a tightening of carving connections, Nanometer |
Fastener tightening torques are given in the text of the Head and on some graphics *. |
* Highlighted text in bold torques are subject to exact observance; no bold efforts resulted only roughly |
Bolts flywheel clutch | 25 |
Lever clutch |
| 9 |
| 8 |
The rear engine mount / PPC |
Bolts (2) | 25 |
Bolts (3) cross back to the body | 40 |
Bolt or nut fixing engine support to CPR | 50 |
Flange nuts to the propeller shaft Transmission: |
| 40 |
| 60 |
Propeller shaft flange nuts to the flange of the main transfer |
| 40 |
| 60 |
Bolt back cover to the gearbox | 50 |
Drain Plug Differential | 50 |
Differential fill plug | 50 |
Breather | thirty |
Bolt driven gear to the differential | 85 |
