 printable version
The steering wheel, mirrors
Manual adjustment of the steering wheel
There is a risk of an accident!
For safety reasons, do not change the position of the steering wheel while driving.
Also at short leaving the vehicle, remove the ignition key.
When the door is open the driver adjustment of the steering wheel, however, is also possible. Do not leave children in the car unattended.
Handle (1) is located on the steering column.
Exemption: The handle (1) Pull up to the end.
Installation: Pull the steering wheel, push, move up or down.
Fixation: The handle (1) inward push through.
Electric adjustment steering wheel position
Adjusting the steering wheel position is possible if the key is in the ignition switch is turned to the position 1 or 2 or open the corresponding door. The switch is located on the driver's door.
1 Longitudinal movement of the steering column
Switch slide forward or backward.
2 The height of the steering column
Switch, slide up or down.  | The steering wheel can be recorded in memory along with the position of the seat and exterior mirrors with driver's side. |
(Memory function - see. Section position memory seats, steering wheel and exterior mirrors).
Exterior mirrors 1 Outside rear view mirror on the driver
2 door mirror on the passenger side
3 adjusting switch
4 Memory button
Exterior mirrors - spherical, thereby expanding the field of view.
Adjusting rear-view mirrors
The key is in the ignition switch, turn to position 2.
Selecting the mirror:
On the part of the driver - click -1-.
On the driver's side - press -2-.
Adjusting the switch if necessary -3- Press up, down, left or right. | At low ambient temperatures mirrors are heated automatically. |
Recording in mirror position memory
Models with memory function
However, the position of the exterior mirrors memorized the position of internal mirrors, seats and steering wheel. (Memory function discussed in Section position memory seats, steering wheel and exterior mirrors).
Setting the position of the door mirror when parking, Passenger Side
The key in the ignition switch, turn to position 2.
The menu ?�CONVENIENCE?� (comfort control) system of "individual setting" on the setup menu ?�MIRROR SETTING?� ?�WHEN PARKING?� (the mirrors PARKING) must be set to ?�ON?� (ON.) (Section multifunction steering wheel, Universal Display). When set to ?�OFF?� (OFF.), The function is disabled.
Press (2).
Engage reverse gear.
Outside rear-view mirror on the passenger side is turned down.
The exterior mirror is rotated to its original position if:
?� Reverse gear off - about 10 seconds;
?� Exceeded the velocity of 10 km / h - immediately, regardless of the enabled transmission;
?� Press the button (1).
Storing the position of the door mirror when parking, Passenger Side
Models with memory function
The key in the ignition switch, turn to position 1 or 2.
The car should be.
Press (2) and set the mirror on the edge of the curb of the sidewalk.
Press the memory button (4).
The adjusting knob (3) for 3 seconds, hold down the bottom.
Mirror should not change its position.
If the mirror changes position, repeat the entry in the memory. | For each key can be recorded in memory respectively one position when parking. |
Folding exterior mirrors with electric drive The buttons are located above the light switch.
1 Folding
2 Deployment
The key in the ignition switch, turn to position 2.
Folding exterior mirrors: Lightly press the button (1).
Deploying outside mirrors: Lightly press the button (2).
Door mirrors with driver's side auto-dimming
Blackout: The key is in the ignition switch, turn to position 2.
Depending on the angle of incidence of light outside rearview mirror on the driver automatically turns off or dimming function. | When enabled reverse gear or is switched on the interior light door mirror on the driver produces blackout. |
Interior rearview mirror with mechanical dimming Adjust the mirrors by hand.
Blackout against blindness: c a lever -1- blackout.
Interior rearview mirror with auto dimming
Adjust the mirrors by hand.
Blackout against blindness: the ignition switch, turn to position 2.
Depending on the angle of incidence of light inside rearview mirror automatically enables or disables the blackout. | When enabled reverse gear or is switched on the interior light dimming function in the interior mirror is disabled. |
|
