 printable version
Removing and installing front seat belts
 | The following is only a description of the withdrawal. Installation is in the reverse order. |
Components for the front seat belts  The components of the installation of rear seat belts  On models with the emergency belt tensioners take the following precautions: - Before removing the tensioner, turn off the ignition, then disconnect the battery first negative and then positive lead;
- Not allowed repair and dismantling of the tensioner;
- Tensioners, subjected to impact or shock, falls to the floor or having damage (dents, cracks) must be replaced on a mandatory basis;
- To remove the tensioner is not allowed the use of percussion instrument;
- Do not use lubricants, cleaners or any similar means of tensioner and expose to temperatures above 100 deg .;
- After tripping tensioner seat belt must be replaced complete with the tensioner.
Tensioner front seat belt | - Remove the cover and remove the anchor bolt.
- On the 5-door models, remove the lower section of the pillar trim B, and the 3-door - the rear section of the side trim.
- Emergency Disconnect tensioner.
- Remove the bolt and lower emergency tensioning the anchor bolt.
- Remove the tensioner assembly.
|
|
Lock the front seat belt | - Remove the front seat (see. Section Removal and installation of the front seat).
- Separate the sensor wiring connector lock fasten your seat belts on the rear of the seat cushion.
- Remove the interior trim panel of the seat cushion.
 | - Remove the anchor bolt and remove the lock.
|
|
|
Rear seat
|
