printable version

Trip computer and multi-function display

Trip computer and multi-function display

Location of controls Trip computer

Ignition can be viewed sequentially on the multifunction display trip computer data. To do this, use the buttons on the display panel or the button ?�I?�, located on the steering wheel.

The display may be distorted at low temperatures and strong magnetic fields.

Information Notices

Viewing Trip Information

There are 4 types of news reports: mileage by fuel (Range), distance covered (Trip distance), while driving (Trip time) and average speed (Average speed). The sequence of actions required to access the data of the trip computer indicated in the diagram above. If the tank is running low of fuel, trip computer automatically displays the data on the distance that you can travel on the remaining fuel. Display will flash to attract the driver's attention. To return to the previous screen, press the ?�MENU?� or ?�I?�. With further decrease of the reserve fuel instead of numbers stock run the display shows 4 lines. Distance, time, movement, and the average speed calculated since the last reset. These readings can be reset individually (for this, press and hold down the ?�OK?� button for at least 1 second), and all at once. With a total zeroing also reset the average fuel consumption data. The total reset is only possible using the buttons on the screen: the main menu, select ?�DRIVE COMP?�, confirm with ?�OK?�, then navigate to ?�RESET ALL?� and ?�YES?�.

To view the data on fuel consumption, select the sub ?�FUEL ECON?� from ?�DRIVE COMP?� in the main menu. Chance Display the three types of reports about fuel consumption: the average consumption (Average, is updated approximately every 30 seconds), the instantaneous flow rate (Inst, available only at speeds above 20 km / h), and the accumulated data on the average consumption (History). After resetting the value of the average fuel consumption of its current value is added to the accumulated data that appear on the display as a chart. Triangle under the right column of the chart marks the last value of average fuel consumption.

The display in the derivation of the accumulated data on the average fuel consumption

Reminders, vehicle maintenance

Ignition can use the buttons on the display panel, programmed reminders about specific operations of maintenance of the vehicle. The official dealer of Nissan in the sale of a car trip computer programs to run until the next scheduled maintenance (sub ?�SERVICE?� menu ?�MAINTENANCE?�). To program an additional reminder (subparagraph ?�REMINDER?� menu ?�MAINTENANCE?�) to replace any parts of the car, do the following.

• Use the buttons to highlight the menu item ?�MAINTENANCE?� and confirm by pressing the "OK" button.
• Similarly, select ?�REMINDER 1".
• Login Menu ?�SET NEXT?� and set to run programmed reminders. Each press of the button to select the value of the path to the service increased by 500 km. Confirm with "OK".
• Press the ?�MENU?�, to return the screen to its original state. When the set path is displayed reminder. Menu items ?�ENABLE?� and ?�DISABLE?� allow you to activate and deactivate the reminder. After setting the new value path reminder from the display disappears.

Select language news reports

To change the language, choose from the main menu ?�SETTINGS?�, then in the submenu, select ?�LANGUAGE?�. The display will show a list of available languages. Highlight the desired language and confirm with ?�OK?�.

Set times and dates

From the main menu ?�SETTINGS?�, then in the submenu, select ?�TIME / DATE?�. Further, to set the time, select ?�CLOCK?�, and to set the date - the item ?�CALENDAR?�.

To set the hours / minutes of the menu ?�CLOCK?� to select items accordingly ?�HOUR?� / ?�MINUTE?�, then use the buttons to set the desired value. Paragraph ?�12/24 HOUR?� menu ?�CLOCK?� for change between the time format. When displaying the time in 12-hour format includes indicators AM (before noon) or PM (afternoon). To exit the current screen settings in the main menu screen press ?�MENU?�.

To set the date / month / year in the menu ?�CALENDAR?� select items accordingly ?�DAY?� / ?�MONTH?� / ?�YEAR?�. Set the desired value using the buttons. To exit the current screen settings in the main menu screen press ?�MENU?�.

To set the dates of anniversaries of memorable events, select the main menu ?�SETTINGS?�, then in the submenu, select ?�ANNIVERSARY?�. Next, select the type of event: ?�WEDDING?� (Wedding) ?�BIRTHDAY 1" (Birthday 1) or ?�BIRTHDAY 2" (Birthday 2). Then set the date and month of the event, acting in a manner similar to that described for setting the current date. C using the item ?�ENABLE?� / ?�DISABLE?�, you can enable or disable a message about the anniversary. To exit the current screen settings in the main menu screen press ?�MENU?�. When the alarm anniversaries is displayed ?�Happy Anniversary?� (With wedding anniversary!) Or ?�Happy Birthday?� (Happy Birthday!).

Thermometer

Not some models in the information display can show the temperature of the ambient air (not in the cabin). For this to be included on the ignition. If the ambient temperature dropped below 3 degrees, its display will blink. After 20 seconds, the temperature stops flashing, blinking only her designation. Low temperature warning remains active until it rises to 4 degrees.