 printable version
Service clutch pedal
Refitting Withdrawal The components of the clutch pedal
| - In the car, disconnect a pusher on the clutch pedal.
- Give a nut on the bolt axial pedal, remove the washer.
- Try to remember adjusting position of the return spring, remove the axle bolt and remove the clutch pedal of the vehicle.
- Remove the pedal and clutch hub.
|
|
Setting Installation is in the reverse order. | - Check the condition of bushings and couplings, if necessary, replace.
- Before installing moderately lubricate the fastening pin and axle bolt molybdenum disulfide grease on lithium basis.
- Set in a former position return spring.
- Tighten the nut with the required axial force of the bolt.
- Adjust the height of the situation and free the clutch pedal.
|
|
|
