REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Nissan Patrol (from 1988 to 1997, the year of issue)

general info. full specifications. diagnostics. hints. tips. tricks

Home

Nissan
	Patrol
		Introduction
		Troubleshooting
		Adjustment and routine maintenance
		Engine
		System of cooling, heating and air conditioning
		The power supply system and exhaust
		Systems for reducing emissions
		Systems of an electric motor
		Transmission
		Clutch
			Service assembly clutch and clutch mechanism
			Service master cylinder
			Service slave cylinder
			Service servo
			Service clutch pedal
			Bleeding the hydraulic system
			Adjust the clutch
		Brakes
		The front and rear axles, chassis and steering
		Body
		Onboard electric

Bleeding the hydraulic system

PERFORMANCE ORDER

Poddomkratte the front of the car and establish it on props.
Make sure that the master cylinder reservoir filled with clean hydraulic fluid.
Connect the segment transparent hose to the valve pumping executive cylinder of coupling. The second end into a transparent container is partially filled with clean hydraulic fluid.
Depress the clutch and open the valve pumping. Close the valve and slowly release the pedal.
Repeat the previous section as long as the cylinder comes out clean, free of air bubbles in the hydraulic fluid.
Remove the hose, lower the car on the ground and make its trial runs, checking serviceability of functioning of the clutch.