printable version

general information

Location brake pipe on the car without ABS

1 - front brakes 2 - rear brakes 3 - the master cylinder 4 - a pressure regulator

Location of brake pipe on the car with ABS

1 - front brakes 2 - rear brakes 3 - the master cylinder 4 - ABS unit 5 - Pressure Regulator

Location brake pipe on the car with carburetor engine

1 - front brakes 2 - rear brakes 3 - pressure regulator (mounted in the cylinder) 4 - the master cylinder

In all described in this manual models the dual-circuit brake system with front disc and rear drum brakes, if equipped petrol engine, disc brakes and all, if you have installed fuel-injected engine. Since certain models are equipped with ABS, you should pay attention to the brake pipe connections, at work, in which the lines are disconnected. Front disc brakes are equipped with floating calipers are used on most models. Floating caliper piston has only one instead of two on the carriage former designs. At described in this publication models have disc brakes of the two performances. All the brakes are automatically adjusted. The system includes a control valve for adjusting the brake pressure to the wheels. On the set of drum brakes the valve located on the inside of the wheel brake cylinder for disk brakes installed two separate valve (see. Illustration). Hand brake acts via a cable on the rear wheels. The system is installed brake booster.