Straightening tool

Currently, the sale of a large number of straightening hammers, which vary widely by weight, the form of the working part and the materials from which they are made. Working part straightening hammers sharpened in radius and must be polished. Traces of nicks, scrapes, scratches or other defects on the work of the straightening hammers are not allowed.

Hammers, impact of which is a flat die at straightening faces the body panels are not recommended as they leave traces of metal in the form of nicks.

To edit parts with large deformation, using wooden hammer (mallet). On small plots straightening deformed special hammer made available on the working of the notch.

Light hammers, hammers, trowels used for removal of small dents and nicks when brought face surface for painting or when you want to restore the surface while maintaining the paintwork.

Hammers with plastic or rubber inserts are used in the final (fine) straightening painted surfaces.

Shaped plate, the mandrel and the anvil are designed to support sheet metal body panels in the recovery process of the deformed sections.

The working surfaces of these instruments should always be well polished. When small dents or bulges without damaging the paint layer, the surface of some of the tools brought to the ideal of purity and chrome.