|
|
 printable version
Heater controls and air conditioning
Withdrawal
| PERFORMANCE ORDER |  | 1. Remove the decorative panel heater controls and air conditioning. To do this, use a screwdriver with a thin blade, press clips, nye located in the corners of the panel. |  | 2. Unscrew the four screws securing the heater controls and air conditioning. | | 3. Disconnect from the control electrical connectors. |
|
Setting
| PERFORMANCE ORDER | | 1. Before installation, check the smooth running of cables of management and, if necessary, replace them. | | 2. To facilitate the identification envelope control cables have a different color. |  | 3. Put the rounded ends of the rope (1) on the levers (2) management of a heater and air conditioner, and fix covers of cables in the control unit housing. | | 4. Connect the control unit to an electric socket. | | 5. Insert the control unit with the cables connected to the instrument panel. | | 6. Install and tighten the two screws panel heater. | | 7. Screw in the four screws that secure the heater controls and air conditioning. | | 8. Insert the trim panel of the control unit to clear its locks. |
|
|
|
