add to favorites contacts sitemap
REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Volkswagen Passat B5 (from 1996 to 2004, the year of issue)

general info. full specifications. diagnostics. hints. tips. tricks
Volkswagen Passat B5
Home
 
Volkswagen
Passat B5
Instructions
Maintenance
Engines
Cooling
Fuel system
Motor Control
Technical data engine management systems
Employment engine management system
Checking the fuel injection system
Sensors and actuators, engine control
Ignition system
A fuel highway and fuel injectors
The basic malfunctions of the engine management system
An exhaust system
Transmission
Chassis
Steering
Brakes
Body
Heating, ventilation
Electrical
 


Hit Counter by Digits


print page printable version

Motor Control



Engine code
The engine management system
AHL ADP ADR AEB AGZ ACK / ALG
Simos 2 Motronic 3.8.2 Motronic 3.8.2 Motronic 3.8.2 Motronic 3.8.2 Motronic 3.8.2
Turnovers
singles
stroke
/ min
760 - 960 760 - 960 760 - 960 760 - 960 650 - 750 710 - 860
Content
CO%
0.5 0.5 0.3 0.5 0.5 0.5
Maximum
Turnover,
/ min
6500 6500 6500 6500 6500 6500

Fuel pressure control

Engine code
The engine management system
AHL ADP ADR AEB AGZ ACK / ALG
Simos 2 Motronic 3.8.2 Motronic 3.8.2 Motronic 3.8.2 Motronic 3.8.2 Motronic 3.8.2
The fuel pressure at idle speed:
- A vacuum hose
??? Connect the bar 3.5 3.5 3.5 3.5 2.5 3.5
??? Remove bar 4.0 4.0 4.0 4.0 thirty 4.0
The pressure in the fuel system 10 minutes after the engine is switched off, the bar 2.5 2.5 20 20 20 2.2

Fuel injectors

Engine code
The engine management system
AHL ADP ADR AEB AGZ ACK / ALG
Simos 2 Motronic 3.8.2 Motronic 3.8.2 Motronic 3.8.2 Motronic 3.8.2 Motronic 3.8.2
Capacity, ml / 30 sec
-
85 - 105 85 - 105 130 - 150 90 - 125 90 - 125
Resistance,
Ohm
14 - 17 12 - 15 12 - 15 12 - 15 14 - 17 15 - 21.5

On vehicles with petrol engines are installed various engine management system.

Engine
The engine management system
1,6-I AHL
Simos 2
1,6-I ADP
Motronic 3.2
1,8-I, 2,3-I
Motronic 3.8.2
2,8-I (V6)
Motronic 3.8.2

The use of electronic engine management system has the following advantages:

- Ensure optimum fuel supply to the engine at all ekspluatatsi tional modes, thereby reducing fuel consumption while maintaining the dynamic characteristics of the vehicle;
- Due to the more complete combustion of the fuel and the use of the catalyst decreases harmful emissions with the exhaust gases;
- As the electronic engine management system detects and stores faults, significantly accelerating the search and detection of faults;
- Engine management on all operational modes sets the optimum ignition timing, the time and the amount of fuel supplied to the engine. Also, the engine management system communicates with other vehicle systems, in particular, to a control system or an automatic gearbox with anti-theft system.

The components of the engine management system is very reliable and virtually maintenance free. During maintenance, you only need to replace the air filter and spark plugs. As for testing, adjusting and repair of the engine management system is necessary to use a complicated expensive equipment, then the work should be performed at a specialized workshop.

During operation of the vehicle do not need to make adjustment of turns of idling and the maintenance WITH in exhaust gases.


A warning

At work on the ignition system with the ignition must be careful, because you can get an electric shock from the high-voltage part of the ignition system. People with a stimulator of heart activity is not advisable to check and repair the engine management system. Turn off the ignition before connecting or disconnecting any element of the ignition system or the stylus instrument.

The fuel system is under constant pressure, even after switching off the engine, so when carrying out any work on the fuel system must be depressurised.

To prevent accidental short-circuits the circuit and damage to electronic components engine management system, always remove a wire of weight from the accumulator.


Before performing any work on the engine management system call recorded in the memory of her fault. Also, check the tightness of the fuel system and the air supply to the engine.

Normal operation of the engine management system is only possible when the vehicle supply voltage is not lower than 11.5 V.

If after carrying out work on the engine management system, the engine starts and stops after a short time, perhaps, the engine turns off anti-theft system. In this case, the call from the memory stored therein the fault and, if necessary, adjust the motor control system.





« previos page
The basic malfunctions of the engine management system
next page »
Technical data engine management systems

Copyright © 2010 AutoManuals.biz. Trademarks belong to their respective owners. All rights reserved.