 printable version
Topping up the coolant
Engine cooling system should be filled with a mixture of water, antifreeze and anticorrosive means G12. Additives coolant exclude defrost engine block and corrosion and lime deposits, and also increase the boiling point of the coolant. Due to the fact that cooling the sealed type by heating the coolant in the cooling system there is an overpressure, which also contributes to the boiling point of the coolant. Limiting the pressure in the cooling system at the level of 1.2-1.5 bar valve is carried out in the reservoir tank cover. When refilling the liquid cooling system, even in the warm season, use only a mixture of anti-freeze, anti-corrosion agents G 12 and clean water with a low lime content.
|
