 printable version
Drain coolant
| Fig. 2.186. Cooling components (engines with code letter BLX, BLY, BLR): 1 - spring clamps; 2 - connection hose; 3 - O-ring; 4 - temperature sensor of the cooling means; 5 - mounting bracket; 6 - a connecting pipe; 7 - on top of the radiator; 8 - a bolt 10 Nm; 9 - throttle control module; 10 - bolt 15 Nm; 11 - the coolant supply tube; 12 - connecting hose; 13 - to the oil cooler; 14 - pipe cooling means; 15 - a bolt 15 Nm; 16 - to the expansion tank; 17 - bolt 10 Nm; 18 - a hose to the bottom of the radiator; 19 - a bolt 15 Nm; 20 - coolant distributor housing; 21 - coolant pump; 22 - a bolt 15 Nm; 23 - the heat exchanger heating; 24 - a hose to the coolant radiator on top; 25 - EGR valve
|
| Fig. 2.187. Wiring coolant hoses (engines with code letter BLX, BLY, BLR): 1 - a broad tank; 2 - EGR valve; 3 - exchanger heater; 4 - transmission oil cooler; 5 - oil cooler; 6 - throttle control module; 7 - a radiator; 8 - Coolant distributor housing with thermostat for cooling the engine of the algorithm; 9 - coolant pump; 10 - cylinder head / cylinder block
|
NOTE To recycle or reuse the coolant should be drained into a clean container. Observe proper disposal. |
Open the expansion tank of the cooling system. Remove the soundproofing screen. Release the quick coupling and remove the water hose from the radiator. In addition, disconnect the water hose from the lower pipe and drain the remaining coolant.
|
