add to favorites contacts sitemap
REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Volkswagen Passat B6 (from the year 2004)

general info. full specifications. diagnostics. hints. tips. tricks
Volkswagen Passat B6
Home
 
Volkswagen
Passat B6
Operation and maintenance of car
Engine
Overview
Mechanical (engine capacity of 1.6 liters)
Lubrication system
Cooling system
Fuel Injection System
The mechanical part (petrol engines of 2.0 liters)
Lubrication system
System ohlazhdeiya
Fuel system
Injection system
General information on the injection system
Removing and installing intake manifold
Removal and installation of atomizers
Checking switching intake manifold
System of release of gases otrabotavschih
Ignition system
The mechanical part (diesel engines of 2.0 liters)
Lubrication system
Cooling system
Fuel system
Turbocharging turbo running on exhaust
The direct injection diesel
Exhaust
Tables
Transmission
Chassis
Steering Gear
Brakes
Onboard electric
Body
diagrams
 


Hit Counter by Digits


print page printable version

General information on the injection system



Fuel hoses in the engine compartment are allowed to fix only the spring clamps corresponding model year. Using clamps and clamps with screw fastening is not allowed.
Disconnect the battery is permitted only when the ignition is off. If you have a car radio with a protective coding before disconnecting the batteries need to know the security code.
Follow all the instructions necessary after connecting the battery.
To maintain perfect operation of electrical components required voltage is less than 11.5 V.
Do not use sealants containing silicone. Elements silicone sucked motor without burn through and damage lambda probes.
At the end of the survey work was carried out fault memory of engine control unit, remove all records of faults that may have arisen as a result of inspections and repairs. After clearing the fault memory is necessary to create a code of OBD.
If after troubleshooting, repair or overhaul the engine component is enabled only for a short time and then off again, this indicates that the engine control unit is blocked by an immobilizer. In this case it is necessary to adapt the control unit ?�Gefuehrte Funktion / Guided functions".
Vehicles with air bags are equipped with fuel shut-off in the collision. It should reduce the risk of fire after the collision of the car by turning off the fuel pump control unit of the fuel pump.
When you open the doors of the fuel pump is switched on for 2 seconds to pressurize the fuel system. This increases the comfort when starting the engine.

Specifications




« previos page
Injection system
next page »
Removing and installing intake manifold

Copyright © 2010 AutoManuals.biz. Trademarks belong to their respective owners. All rights reserved.