Removing and installing steering wheel

Withdrawal

Remove the driver airbag module.

Disconnect the connector 1 and 2 Vito spring (Fig. 5.7).

Turn the steering wheel to the center position (wheels are straight).

3 Remove the screw and pull the steering wheel column.

Setting

Set the steering wheel to the column.

Centering mark of the steering wheel and column must match.

Enter releasable contact connection sensor steering angle into the relevant hole in the bottom of the steering wheel.

Connect plug 1 to terminal 2 of the steering angle sensor wheel.

Secure the steering wheel bolt 3, tightening torques.

Replace the bolt Core label.

Bolt can be used five times.