printable version
Setting steering
Installation is carried out in reverse order. Threaded bush steering must enter into holes consoles.
NOTE Before installing the steering lubricate the seal of his anti-friction means, for example pasty soap. After installing the steering mechanism on the universal joint, check the inflection of his seal in place fit for the mounting plate and correctly position seal the hole in the footwell. Otherwise, the possibility of penetration of water and / or noise. Keep the sealing surfaces. Before installing the subframe bolts, verified the steering mechanism on a stretcher and insert the bolts and steering stabilizer. |
Install the lower screen proofing. Screw the universal joint to the steering mechanism. Connect the battery. After that, follow the basic nastroykudatchika steering angle with a tester. After installation, perform the checks the position of the steering wheel in the driving experience. If the steering wheel is not straight, or set a new steering mechanism, it is necessary to adjust the angles of the wheels. If a new steering mechanism, it is necessary to adapt the control unit of the amplifier with a tester. After that, follow the basic nastroykubloka control amplifier with a tester.
|