add to favorites contacts sitemap
REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Volkswagen Passat B6 (from the year 2004)

general info. full specifications. diagnostics. hints. tips. tricks
Volkswagen Passat B6
Home
 
Volkswagen
Passat B6
Operation and maintenance of car
Engine
Transmission
Overview
Manual Transmission
Automatic transmission
Transmission
Transmission
Marking gearbox
Capacities
Check the ATF level and top-up
Draining ATF and filling
Electrical / electronic components and their installation location
Removal of the lever gearbox control selector
Removal and installation of a cable of the selector gearbox
Check selector lever cable
Adjust selector lever cable
Removing and installing handle
Check gearshift
Removing manual, Passat 2006 with "external" water cooling radiator ATF
Installation manual, Passat 2006 with "external" radiator cooling ATF
Drive Train
Tables
Chassis
Steering Gear
Brakes
Onboard electric
Body
diagrams
 


Hit Counter by Digits


print page printable version

Check gearshift



If you find the lever to position ?�R?�, ?�D?� and ?�S?� starter should be blocked.
On vehicles with a steering wheel located on the right side of the starter can be included in selector lever position "P" and "N" only when no button is recessed in the handle of the selector.
When driving at a speed of more than 5 miles / h and the selector switch in position ?�N?� electromagnetic lock selector lever shall not operate and lock the selector lever. The selector must be free to take a position for the movement.
When the selector lever is moved to ?�N?� at a speed less than 5 km / h (the car practically at a standstill), the solenoid lock lever must be triggered only after about 1 second. From position ?�N?� the selector lever must be displayed only when the brake pedal is depressed

Lever in position ?�P?�, the ignition is on
The brake pedal is pressed.
The selector lever is not output from the position ?�P?�, even when the unlock button is pressed. Selector lever lock solenoid locks the lever.
Brake pedal depressed:
Selector lever lock solenoid releases the lever. It is possible to set the selector to the driving position. Slowly switch the selector lever from the "P" position ?�S?�; thus check whether the display on the instrument panel selector lever.

Lever in position ?�N?�, the ignition is on
The selector lever is not output from the position ?�N?�, even when the unlock button is pressed. Selector lever lock solenoid locks the lever.
Selector lever lock solenoid releases the lever. It is possible to set the selector to the driving position.

Lever in position ?�Tiptronic?�
Set the selector lever into the groove for running Tiptronic.
Instead, the letter ?�D?� in the cover of the gearshift should glow icons "+" and "-".
While translating the selector lever into the groove for operation in Tiptronic mode, the letter ?�P?� ?�R?� ?�N?� ?�D?� ?�S?� on the indicator in the instrument cluster must be replaced by the numbers "6", "5", "4", "3", "2" "1".

The position indicator of the selector
When the shift lever indicator lit up at once all the icons, it indicates that the transmission is in emergency mode.




« previos page
Removing and installing handle
next page »
Removing manual, Passat 2006 with "external" water cooling radiator ATF

Copyright © 2010 AutoManuals.biz. Trademarks belong to their respective owners. All rights reserved.