 printable version
Design Features
Body Passat car carrying the four-door, consists of a frame and external components. The frame body includes a base, side walls, roof and frame members connected with each other by electric welding (spot, seam welding and arc) and a folding design, having sufficient rigidity and capable bear all car units, hanging units stand nodes and interior details. The body consists of several parts joined together, forming a whole part of the front and rear frame. Certain parts of the body contribute to the ultimate strength of the body, so monitor the weld during repair work. If repair work is destroyed or damaged factory seal or corrosion-resistant coating on parts of the body, apply a bottom anti-corrosion coating and sealing. When applying anti-corrosion coating on the parts of the underbody corrosion-resistant chromium-use or anything similar. The use of combined resources not recommended. Lower Gearbox casing - a single steel element serving to protect the lower part of the gearbox. This coating protects against small stones, gravel or other objects into the gearbox during normal driving.
ATTENTION A large body repair and replacement of glued windscreen and rear window must usually be carried out in a service station official dealer of Nissan, where it has all the necessary equipment and supplies. |
For half the nodes are side doors, bonnet, tailgate, front fenders, bumpers and grille. The doors, hood and trunk lid are mounted on the body by means of hinges. The front wings are attached to the body with bolts. The front and rear fenders are bolted. Grille is attached by means of plastic clamps and screws. Windshield three-layer type of "Triplex". Glass door, side and rear tempered glass. Windshield, rear and side windows are glued to the window openings of the body. The front seats are separate, with backrest adjustment mechanism and moving in the longitudinal direction, with easily removable headrests, height adjustable. Rear seats with integral seat cushion and divided folding armrest in two parts. Front and rear side seat belt inertia and the rear middle passenger lap belt neinertsionny. In the car cigarette lighter installed, the front and rear ashtrays, sun visors, heater, mirrors, handrails. Under the driver's seat is provided for fastening the fire extinguisher. The car is equipped with front and rear lugs for towing. Management of ventilation and heating the cabin is carried out automatically by the controller. If the car is equipped with air conditioning system, the controller also controls the microclimate in the cabin automatically.
| 
