printable version
Removal and installation of the license plate
Withdrawal
Remove the 2 clips and remove the license plate holder 1 with the grille 3 (Fig. 8.16).
Setting Place the license plate holder 1 on the grille 3 and push the clamps 2.
NOTE On vehicles with front parking distance when drilling holes necessary to observe the distance a, equal to 12 mm. |
Wiring harness 3 paved parking aid at the height of the upper holes in the bumper beam 5. Align the license plate holder 1 on the grille 3. Set the limit on the depth of the drill on - a = 12 mm and drill holes. Place the license plate holder 1 on the grille 3 and push the clamps 2.
|