REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Volkswagen Polo (from 1994 to 2001, the year of issue)

general info. full specifications. diagnostics. hints. tips. tricks

Home

Volkswagen
	Polo
		General Information
		Engine
		Greasing system
		Cooling
		Fuel-injection systems
		Ignition system
		Coupling
		Manual transmission
		The drive wheels
		A steering without the amplifier
		A steering with the hydraulic booster
		Front suspension
		Rear suspension
		Brakes
			Adjusting the brakes
			Front disc brakes
			Rear drum brakes
				Checking and replacing the brake pads
				Brake shield
				Brake cylinder
				Repair of brake drums
			The main brake cylinder
			Brake servo
			Bleeding brake system hydraulic drive
			Brake pressure regulator
			Parking brake
			Anti-lock braking system (ABS)
		Electrical
		Heating and ventilation system
		Automatic Transmission
		Applications

printable version

Brake shield

Fig. 300. Details of the rear brake: 1 - the brake pads; 2 - tension spring wedge; 3 - lower return spring; 4 - the upper return spring; 5 - the parking brake lever; 6 - compression spring; 7 - cup compression spring; 8 - pressure spring; 9 - Spreader bracket; 10 - regulates the wedge; 11 - working brake cylinder; 12 - bolt brake cylinder; 13 - brake board; 14 - retaining pin; 15 - plug inspection hole

After removing the brake pads and the wheel cylinder and loosen the four bolts brake board 13 (see. Fig. 300) can be removed from the beam of the bridge. Its mounting bolts are tightened to 60 Nm. They screwed with established under their heads shaped washers and bo2lshaya bearing surface is directed toward a brake board.

« previos page
Checking and replacing the brake pads

next page »
Brake cylinder