 printable version
Changing wheels
Driving changing wheels Since the front tires wear out much more strongly recommended to replace the front wheels to the rear. However, they will have about the same lifespan.
Replace the wheels individually and bridges. Thus wheels with deeper tread are always installed in front. On all 4 wheels fitted with tires of the same type and, no-possible, the same tread pattern.
A warning  When replacing or removing tubeless tires is necessary, based on security conditions, also replace the rubber valve.
When tightening the wheel bolts, always use a torque wrench. This ensures a uniform tightening them.
| PERFORMANCE ORDER | | 1. To prevent corrosion, lubricate the rim centering fit on wheel hubs front and rear. Each removal on the wheel used for lubrication of rolling bearings. | | 2. Alloy wheels are protected against corrosion with clear lacquer. When replacing wheels view that the protective layer is not damaged, otherwise back cover with varnish injury site. | | 3. Contaminated bolts clear. Replace if damaged or zakorrodirovana thread. | | 4. Wheel clamping bolts crosswise in several stages. |
A warning Avoid one-sided or uneven tightening of the bolts of the wheels. Tightening torque of wheel bolts is 160 Nm.
|
|
|
