 printable version
Installation of additional electroaccessories
Clamps for mounting of additional wires When the works relating to the electrical system in order to prevent the risk of short-circuit in the wiring, always disconnect and put aside the earth cable (-) battery.
A warning  If the battery has been disconnected, the memory control unit erases fault the engine, transmission, anti-lock system as well as other electrical appliances are switched off, such as radio, clock or erased their memory.
When drilling holes in the body and their edges burrs should be removed and should be coated with a primer and a lacquer. The chips must be carefully removed.
If required (to avoid noise while driving) from the newly installed cable and its abrasion, protect it further izolirovochnyh tape, plastics, cable clamps, and so on. N. In this case, pay particular attention to the fact that between the brake pipe and paved cables was a distance not less than 10 mm, and between the brake pipes and cables that move together with the engine or other parts of the machine was a distance not less than 25 mm.
When installing additional electrical load every time you need to check whether the generator to withstand the load of the appliance is installed. If necessary, the installation of a more powerful generator.
|
