REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Volkswagen Transporter, Caravelle (1990 release)

general info. full specifications. diagnostics. hints. tips. tricks

Home

Volkswagen
	Transporter / Caravelle
		Instructions
		Engine
		Coupling
		Transmission
		Suspension
		A steering
			Total information
			Steering wheel
			Ball joint and steering rod
			Leak test control system
			Bleeding from the control system
			Elimination of vibration of the steering wheel and the front of the machine
			The main parameters of chassis control
		Brakes
		Wheels and tires
		Body
		Electrical

printable version

Steering wheel

Withdrawal

PERFORMANCE ORDER

1. Remove the protective cover from the hand.

2. Disconnect the wiring from the protective cover.

3. Turn the steering wheel and the wheels set straight.

4. Turn the steering wheel to the steering operation of the lock.

5. Unscrew the nut socket wrench 24 mm.

6. Rasklinit steering lock and then set the wheels straight.

7. To note the position of vehicles using the pen. To do this, draw a line on the steering wheel and the end of the steering column.

8. Remove the steering wheel.

Setting

PERFORMANCE ORDER

1. Put on the wheel to the steering column according to the labeling. Before installation, check whether the switch of indexes of turns in the middle position. Otherwise it will damage the cam back to the middle position of the switch of indexes of turns.

2. Install the washer and hex nut.

3. Close the locking wheel.

4. Tighten the nut to 70 Nm.

5. After installation make a test run. When the machine is moving in the forward direction of the steering wheel spokes must be horizontal. If necessary, reposition the wheel.

6. Connect the wiring to the protective cover while paying attention to the signs (+) and (-) on the steering wheel and protective cover.

7. Install cover.

8. Check the horn, and the return direction indicators switch to the neutral position.

« previos page
Total information

next page »
Ball joint and steering rod