Withdrawal

Loosen the bolts of the front wheel, then lift the front of the car and fix on supports. Unscrew and remove the wheel.

Always replace all the pads on the same axle of a vehicle, even if only one shoe is worn. If the brake pads will be repeatedly established, before removal they are necessary for marking.

Remove the protective caps from the inner end of the guide bolts.

Using the screwdriver blade as a lever on the outside of the caliper, remove the retaining spring (Fig. 15.5).

Remove guide pins from the support (Fig. 15.6).

Lift the caliper from the inner lining and a soft wire tie him to the front of the rack. The support should not hang on the brake hose. Brake hose should not stretch or be overwound.

Remove the inner block with a piston caliper and external connector from the holder of a support.