 printable version
Withdrawal
Lift up the vehicle and remove the rear wheels. Release the parking brake.
| Fig. 15.27. The mechanism of the parking brake cable adjustment: A - the direction of rotation of the adjusting nut; In - the shift direction of the adjustment mechanism; C - adjusting nut; D - lock; E - hex flange
|
Turn the adjusting nut C until it stops, and the wrench 13 mm fix by turning the hex flange E. At the same time, slide adjustment mechanism parking brake cable.
| Fig. 15.28. Fasteners parking brake cable to the rear caliper
|
Remove the parking brake cables from the rear caliper (see. Fig. 15.28).
| Fig. 15.33. Location bolt (A) securing the clamp (C) of the cable (B) the parking brake on all-wheel drive vehicles
|
On both sides of the car, loosen the screws A (Fig. 15.33) fastening clamp and release the parking brake cables.
| Fig. 15.34. Location locking tabs (A) fixing the cable (2) to the parking brake lever (1)
|
Squeeze the locking tabs A (Fig. 15.34) and pull the parking brake cable from the lever.
| Fig. 15.35. Location nuts thermofilter
|
| Fig. 15.36. Location nuts parking brake cable clamps
|
Remove the nuts and clamps free parking brake cables (Fig. 15.36). Blade screwdriver to release the parking brake cable sheath from the body under the handbrake lever. In the car, remove the rear section of the center console.
| Fig. 15.32. Direction pressed to disconnect the cable from the spherical head of the handbrake lever
|
Blade screwdriver to press the spherical head and remove the cable from the parking brake lever (see. Fig. 15.32). Remove the parking brake cables from the vehicle.
| 
