 printable version
Back light
| Fig. 18.50. Rear light: 1 - a lining; 2 - turning lamp (12 V, 21 W); 3 - reversing lamp (12 V, 21 W); 4 - diffuser; 5 - a lamp stoplight / overall (12 V, 21/5 W); 6 - the bulb holder; 7 - the case; 8 - gaskets; 9 - nut 4 Nm
|
Withdrawal Open the trunk lid. Remove the side trim near the rear luggage compartment lamp.
| Fig. 18.51. Location lampholder (1), catches (2) and nuts rear light
|
Disconnect the electrical connector 3 (Fig. 18.51) on the rear light. Press the 2 tabs of the lamp to the center of the lamp and remove the bulb holder from the lamp. Press and in this position, turn 90 ?� counterclockwise faulty lamp to extract it from the bulb holder. Remove the four screws and remove the tail light.
Setting Installation is performed in reverse order of removal. Check the clearance around the perimeter of the lamp, which should be the same on all sides and, if necessary, adjust them. Tighten the nuts rear light 4 N ?� m.
| 
