 printable version
Replacement of lamps of external lighting
Before replacing the lamp, remove the ambient light wire of "weight" from the storage battery. Remember: if the lamp just burned, it may be too hot. Before replacing the lamp, check the ambient light corresponding to the electrical circuit and the fuse. Do not touch the glass bulb with bare hands. Grease marks on the lamp lead to the darkening of the bulb and rapid lamp failure. Be sure to replace the failed lamp bulb of the same type. Emerging inadvertently grease stains, wipe clean, lint free cloth or alcohol. When replacing the gas discharge (HID) lamps, be careful, because of the power of these lamps can receive a strong electrical shock. It is not recommended to replace the self-discharge (xenon) lamps, which can be identified by a label with the sign of high voltage to the lamp housing. Incandescent lamps H7 high pressure may burst when changing, so these lamps should be replaced with gloves and protective glasses.
| Fig. 18.20. Location air filter cover
|
When replacing the lamp only at the right headlight, remove the air filter cover (see. Fig. 18.20). Remove the bolts and remove the air tubes 1 and 2 (see. Fig. 18.21).
| Fig. 18.21. Location bolts of air nozzles (1 and 2)
|
| 
