 printable version
Intake manifold
Withdrawal Switch off the ignition and disconnect a wire of "weight" from the storage battery.
| Fig. 3.3.2. Location engine cover screws and the pointer (1) engine oil level
|
Release clamps fastening, remove the three screws and remove the engine cover (see. Fig. 3.3.2). Install the engine oil dipstick in place.
| Fig. 3.3.3. Location air filter cover
|
Remove the two screws and remove the air filter cover (see. Fig. 3.3.3).
| Fig. 3.3.4. Location bolts of air nozzles (1 and 2)
|
Remove the bolts and remove the air tubes 1 and 2 (see. Fig. 3.3.4).
Cars with engines AJM Remove the breather hose from the air filter housing. Disconnect the electrical connector from the air mass meter.
| Fig. 3.3.44. Intake manifold: 1 - the direction of air flow from the cooler; 2 - bolt 10 Nm; 3 - inlet; 4 - Mechanical EGR valve; 5 - O-ring; 6 - the inlet manifold; 7 - the exhaust manifold; 8 - a lining; 9 - a bolt 10 Nm; 10 - connecting pipe
|
Remove the valve 4 (Fig. 3.3.44) EGR 3 with the air filter housing. Loosen the clamp and disconnect the wires from the air filter housing.
| Fig. 3.3.45. Air filter Engine AJM: 1 - the bolt of the air filter housing; 2 - a ventilation hose; 3 - EGR valve; 4 - an electric socket meter air 5 - the air pipe. The arrow shows a clip of fastening of wires
|
Loosen the clamp and disconnect the air pipe 5 (Fig. 3.3.45) from the air filter housing. Remove the bolt 1 and remove the air filter housing.
Cars with engines AVF, AWX
| Fig. 3.3.46. Arrangement of a bolt (1) securing the air filter housing, the electrical connector (2), an air nozzle (3) and the fastening clamp on the motor AVF and AWX
|
Unplug electrical connector 2 (Fig. 3.3.46) of the air flow meter. Unscrew clamp wires from the air filter housing and take wires aside. Loosen the clamp and disconnect the air pipe 3 (see. Fig. 3.3.46) from the air filter housing. Remove the bolt 1 (see. Fig. 3.3.46) and remove the air filter housing.
All models Remove the screws and remove the connecting pipe EGR.
| Fig. 3.3.47. Location of the air pipe (1), hoses (2 and 3) and the inlet manifold mounting bolts
|
Remove the screws and remove the inlet manifold.
Setting Installation is spent to sequences, return to removal, taking into account the following: When installing the intake manifold must be replaced all the self-locking nuts and gaskets.
| 
