REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Chevrolet Lanos (since 2004 of release), Daewoo Lanos (since 1997 of release)

general info. full specifications. diagnostics. hints. tips. tricks

Home

Chevrolet
	Lanos
		Device Car
		Operating Guidelines
		Faults in the way
		Maintenance
		Engine
			Design Features
			Compression check in cylinders
			Removal and installation of mudguards of the engine
			Mount Replacement power unit
			Installation of the piston of the first cylinder to TDC of the compression stroke
			Removal, installation and Troubleshooting flywheel
			Replacement parts Seal Engine
			Cylinder Head
			Removing and installing engine
			Engine repair
			Lubrication system
			Cooling system
			Exhaust
			The power supply system of the engine
			The system EVAP
				Device features
				Removal, installation and check of the canister purge valve
				Removal and installation of the adsorber
			Exhaust gas recirculation
		Transmission
		Chassis
		A steering
		The brake system
		Electrical
		Body
		Wheels and tires
		Purchase of spare parts
		A trip to the STO
		Winter car operation
		Preparation for technical inspection
		Tips novice mechanic
		Applications
		Diagrams

Removal, installation and check of the canister purge valve

You will need a flat-blade screwdriver.

1. Disconnect a wire from the plug "minus" of the storage battery.


2. Press the plastic latch Disconnect the harness from the canister purge valve.	3. Disconnect the inlet and outlet hoses from the valve fittings.


4. Press the screwdriver spring clamp valve ...	5. ... and remove the valve from the bracket.

NOTE

It looks like the car removed from the canister purge solenoid valve. Note his marking to the replacement valve to set the same.


6. To check the valve, attach to a discharge valve fitting medical syringe (it is used as a pump, and the vacuum supply hose to the valve, you can use as an adapter for connection of a syringe). Push the plunger of the syringe - in the valve pressure to be created (you can feel the aspiration of the syringe plunger back to its original position).	7. Then connect the valve to the conclusions of a DC source voltage of 12 V - the valve should open and the pressure should disappear (syringe plunger will move without resistance all the way). Otherwise, replace the valve.

8. Install the canister purge valve in the reverse order of removal.

« previos page
Device features