add to favorites contacts sitemap
REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Chevrolet Lanos (since 2004 of release), Daewoo Lanos (since 1997 of release)

general info. full specifications. diagnostics. hints. tips. tricks
Chevrolet Lanos
Home
 
Chevrolet
Lanos
Device Car
Operating Guidelines
Faults in the way
Maintenance
Engine
Transmission
Chassis
A steering
The brake system
Electrical
Design Features
Mounting blocks
Accumulator battery
Generator
Design Features
Possible malfunctions of the generator, their causes and remedies
Removing and installing the generator
Replacing the alternator pulley
Repair the generator
Starter
The switch (lock) of ignition
The engine management system
Lighting, light and sound alarm
Replacing windscreen wiper motor-reducer
Removal and installation of a washer of glass of a wind window
Removal and installation of the electric motor of the basic fan cooling radiator
Removal and installation of the electric motor of the additional fan cooling radiator
Heated tailgate window glass
Removing and installing cigarette lighter holder
Device combination
Switches dashboard
Replacing the control unit power windows
Car audio system
Replacement sensors and switches
Body
Wheels and tires
Purchase of spare parts
A trip to the STO
Winter car operation
Preparation for technical inspection
Tips novice mechanic
Applications
Diagrams
 


Hit Counter by Digits


print page printable version

Removing and installing the generator



You will need two keys "to 12".
1. Disconnect a wire from the plug "minus" of the storage battery.

NOTE
Alternator drive belt and the power steering pump do not need to be removed from the vehicle, it is enough to remove it from a generator pulley. You do not have to remove the air conditioning compressor belt.

3. Finally, remove the bolt of the generator to a tension lath.
4. Press the latch and disconnect the harness connector from the generator.
5. Remove the nut on the tip of the wire ...
6. ... and disconnect the wire from the output of the generator.
7. Remove the 2 nuts, bolts holding 1 from turning and remove the bolts.
NOTE
Photos fastening of the generator is made from below the car for clarity. Loosen the nuts and remove the screws on top of the engine compartment.

8. Remove the generator from the engine compartment.
9. Install the generator in reverse order of removal.
10. Replace the alternator drive belt and adjust its tension (see. "Check and adjust belt drive alternator and power steering pump").




« previos page
Possible malfunctions of the generator, their causes and remedies
next page »
Replacing the alternator pulley

Copyright © 2010 AutoManuals.biz. Trademarks belong to their respective owners. All rights reserved.