add to favorites contacts sitemap
REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Chevrolet Lanos (since 2004 of release), Daewoo Lanos (since 1997 of release)

general info. full specifications. diagnostics. hints. tips. tricks
Chevrolet Lanos
Home
 
Chevrolet
Lanos
Device Car
Operating Guidelines
Faults in the way
Maintenance
Engine
Transmission
Chassis
A steering
The brake system
Electrical
Design Features
Mounting blocks
Accumulator battery
Generator
Starter
The switch (lock) of ignition
Design Features
Check the switch (lock) of ignition
Replacement of the contact group switch (lock) of ignition
Removal and installation of the switch (lock) of ignition
The engine management system
Lighting, light and sound alarm
Replacing windscreen wiper motor-reducer
Removal and installation of a washer of glass of a wind window
Removal and installation of the electric motor of the basic fan cooling radiator
Removal and installation of the electric motor of the additional fan cooling radiator
Heated tailgate window glass
Removing and installing cigarette lighter holder
Device combination
Switches dashboard
Replacing the control unit power windows
Car audio system
Replacement sensors and switches
Body
Wheels and tires
Purchase of spare parts
A trip to the STO
Winter car operation
Preparation for technical inspection
Tips novice mechanic
Applications
Diagrams
 


Hit Counter by Digits


print page printable version

Removal and installation of the switch (lock) of ignition



The switch (lock) of ignition is mounted on the steering column and is secured by two bolts with samosrezayuschimisya heads, so to replace the bolts must be removed with an electric drill or chisel. The switch (lock) of ignition can be changed without removing the steering column, but for convenience, you can remove it (see. "Removing and installing steering column").
You will need: a screwdriver with a flat blade and Phillips, a chisel, a hammer.
1. Disconnect a wire from the plug "minus" of the storage battery.
2. Remove the steering column covers (see. "Replacement of the contact group, the switch (lock) of ignition").
3. Remove the bolt switch, hitting chisel hammer through tangentially counterclockwise.
4. Similarly remove the second bolt ...
5. ... and remove the switch (lock) of ignition.
6. Remove the screw fastening ...
7. ... and remove the contact group.
8. Insert the key into the switch (lock) of ignition and turn it to ?�ACC?�.
9. Click on the clip ...
10. ... and remove the lock cylinder from the housing of the locking device.
11. Install the parts in reverse order of removal.




« previos page
Replacement of the contact group switch (lock) of ignition
next page »
The engine management system

Copyright © 2010 AutoManuals.biz. Trademarks belong to their respective owners. All rights reserved.