 printable version
Removal and installation of a washer of glass of a wind window
You will need a key "10". 1. Disconnect a wire from the plug "minus" of the storage battery. | | | 3. Disconnect the washer hose. |
| | 4. Remove from the washer pump harness connector. | 5. Remove the two nuts, remove the bolt ... |
| | 6. ... and remove the washer tank assembly with the pump. | 7. Drain the washer fluid reservoir. |
| | 8. Remove the electric pump. | 9. Remove the seal sleeve. |
NOTE Strongly hardened or torn, replace new bushing. |
10. Remove the nozzle of the pump strainer and clean it if necessary. 11. Install the parts in reverse order of removal.
NOTE When installing, first insert the plug into the hole of a tank, and then install the pump. |
|
