add to favorites contacts sitemap
REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Chevrolet Lanos (since 2004 of release), Daewoo Lanos (since 1997 of release)

general info. full specifications. diagnostics. hints. tips. tricks
Chevrolet Lanos
Home
 
Chevrolet
Lanos
Device Car
Operating Guidelines
Faults in the way
Maintenance
Engine
Transmission
Chassis
A steering
The brake system
Electrical
Body
Design Features
Possible malfunctions of the body, their causes and remedies
Removing, dismantling and installation of bumpers
Removing and installing radiator grille
Removal and installation of mudguards of wheels and Lockers
Removal and installation of a forward wing
Removal and installation of a lattice box vozduhopritoka
Hood
Door
The trunk lid
Manhole cover fuel tank filler pipe
Seats
Removal and installation of facing of a tunnel floor
Restraint System (SRS)
Rear view mirrors
Dashboard
Heater and air conditioning
Interior fittings
Removal and installation of facing of salon
Removal and installation of facing the boot
Windscreen wiper
Replacement of the fixed glass body
Removing and installing the attachment flanges of the battery
Care body
Wheels and tires
Purchase of spare parts
A trip to the STO
Winter car operation
Preparation for technical inspection
Tips novice mechanic
Applications
Diagrams
 


Hit Counter by Digits


print page printable version

Removal and installation of mudguards of wheels and Lockers



The arches of the front wheels and the rear of the rear wheel arches set plastic wheel arch liners that protect the body from the abrasive action of sand and stones cast wheels. Mud flaps set for front wheels, protect body thresholds. Rear mud guards protect vehicles traveling behind, departing from damage from the stones of the rear wheels.
You will need: Phillips screwdriver with a blade ratchet Phillips bat hard to loosen the screws.

NOTE
The work shows for the mudguards and wheel arch liners on the left side of the car. Right wing flaps and mud flaps removed and installed similarly.

To remove the front wheel mudguard, do the following.
1. Remove the screw securing the bottom ...
2. ... and the two screws fixing the front mudguard of the front wing ...
3. ... then remove the front wheel mudguard.
4. Install the front wheel mudguard in the reverse order of removal.

To remove the front wheel arch liner, do the following.
1. Remove the front wheel mudguard (see. Above in this section).
2. Remove the three screws that secure the fender liner to the front bumper.
3. Push (for example, a screwdriver) the core pistons front mounting of the fender liner inside the pistons ...
4. ... and remove the cap.
5. Similarly, remove the two pistons of the top fastening ...
6. ... one Pistone rear mounting at the top ...
7. ... and below ...
8. ... and then remove the front wheel arch liner.
9. Install the front liner in the reverse order of removal.

To remove the rear wheel mudguard, do the following.
1. Remove the screw securing the bottom ...
2. ... and the two screws fixing the front mudguard to the rear bumper ...
3. ... and remove the mudguard of the rear wheel.
4. Install the mudguard of the rear wheel in the reverse order of removal.

To remove the rear wheel arch liner, do the following.
1. Remove the mudguard of the rear wheel (see. Above in this section).
2. Remove the top two screws ...
3. ... and one bottom screw fastening the fender liner to the rear bumper ...
4. ... and then remove the rear wheel arch liner.
5. Install the rear wheel arch liner and all the parts removed in reverse order.




« previos page
Removing and installing radiator grille
next page »
Removal and installation of a forward wing

Copyright © 2010 AutoManuals.biz. Trademarks belong to their respective owners. All rights reserved.