 printable version
Removal, check and installation of pneumatic exhaust gas recirculation valve
You will need a key "12". | | 1. Disconnect the vacuum hose from the pneumatic exhaust gas recirculation valve. | 2. Remove the two screws on the valve to the intake pipe ... |
3. ... and remove the valve. NOTE Connection of the valve with the inlet pipe is sealed gasket. Each dismantling of connection replace the new gasket. |
4. To check the valve is in any way negative pressure in its vacuum chamber and watch the movement of the plunger (arrow). If the plunger remains stationary, replace the valve. 5. Set pneumatic EGR valve in reverse order of removal.
| 
