printable version
Removing and installing mounting block salon
Mounting block is removed for replacement wiring or melting of the plastic housing unit. You will need: face head "10", flat-blade screwdriver. | | | 2. Remove the two screws on the mounting block to the body. |
| | 3. Move the mounting block, screwdriver, pry ... | 4. ... and remove the plastic retainer contact plate. |
5. Similarly, remove the second latch. 6. Pushing force clamps, remove the body of the mounting block contact plate and remove the mounting unit from the car. 7. Install the parts in reverse order of removal.
|