add to favorites contacts sitemap
REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Chevrolet Lanos (since 2004 of release), Daewoo Lanos (since 1997 of release)

general info. full specifications. diagnostics. hints. tips. tricks
Chevrolet Lanos
Home
 
Chevrolet
Lanos
Device Car
Operating Guidelines
Faults in the way
Maintenance
Engine
Design Features
Compression check in cylinders
Removal and installation of mudguards of the engine
Mount Replacement power unit
Installation of the piston of the first cylinder to TDC of the compression stroke
Removal, installation and Troubleshooting flywheel
Replacement parts Seal Engine
Cylinder Head
Removing and installing engine
Engine repair
Lubrication system
Cooling system
Exhaust
Design Features
Replacement cushions suspension exhaust system
Replacement of the basic muffler
Replacement of the additional muffler
Replacement catalytic converter or spacers
Replacing the front exhaust pipe
Removing and installing Thermoscreens
The power supply system of the engine
The system EVAP
Exhaust gas recirculation
Transmission
Chassis
A steering
The brake system
Electrical
Body
Wheels and tires
Purchase of spare parts
A trip to the STO
Winter car operation
Preparation for technical inspection
Tips novice mechanic
Applications
Diagrams
 


Hit Counter by Digits


print page printable version

Removing and installing Thermoscreens



While the engine exhaust system is heated to a high temperature. Therefore, when a strong mechanical failure or significant corrosion Thermoscreens installed on the elements of the system, be sure to replace them. In addition to reducing the level of comfort in the cabin, Thermoscreens failure could cause a fire termoshumoizolyatsii body floor as converter exhaust gas is heated to over 600 ?� C.
To remove termoekrana exhaust manifold, do the following.
1. Remove the three screws termoekrana ...
NOTE
The lower bolt termoekrana exhaust manifold can not fully turn out. It is enough to turn it a few turns.

2. ... termoekran and remove exhaust manifold.
3. Set termoekran exhaust manifold in the reverse order of removal.

To remove the silencer termoekrana do the following.
1. Remove the four screws on the base body termoekrana ...
2. ... press the silencer down as far as the firmness of pillows, and remove termoekran.

A WARNING
Termoekrana sharp edges. With his withdrawal protect hands from injury or cloth gloves.

3. Set termoekran main muffler in the reverse order of removal.

To remove termoekrana additional muffler, do the following.
1. Remove the cushion suspension system of the additional muffler brackets (see. "Replacement of the additional muffler"), a reception pipe (see. "Replacing the front exhaust pipe") and from the front bracket of the main silencer (see. "Replacement of the basic muffler").
2. Remove the four nuts termoekrana additional muffler body to the ground ...
3. ... and remove termoekran wring silencer down as far as the resilience of the system.

A WARNING
Termoekrana sharp edges. With his withdrawal protect hands from injury or cloth gloves.

4. Install termoekran additional muffler in the reverse order of removal.

To remove termoekrana converter do the following.
1. Remove the cushion suspension system of the additional muffler brackets (see. "Replacement of the additional muffler"), a reception pipe (see. "Replacing the front exhaust pipe") and from the front bracket of the main silencer (see. "Replacement of the basic muffler").
2. Remove the four nuts termoekrana catalyst to the base of the body ...
3. ... and remove termoekran by pushing down converter so far as the resilience of the system.

A WARNING
Termoekrana sharp edges. With his withdrawal protect hands from injury or cloth gloves.

4. Install termoekran converter in the reverse order of removal.




« previos page
Replacing the front exhaust pipe
next page »
The power supply system of the engine

Copyright © 2010 AutoManuals.biz. Trademarks belong to their respective owners. All rights reserved.