 printable version
Replacing the power steering fluid reservoir
You will need: face head "10" pliers. | | 1. Remove plug the power steering reservoir. | 2. Drain the hydraulic fluid from the tank (for example, a large syringe) and replace the cap to the tank no dirt. |
3. Remove the supply hose, which squeeze the bent antennae clamp pliers and slide the clamp on a hose. NOTE The fitting tank, a check valve that prevents flow of the working fluid from the reservoir. If the valve follows the working fluid ... ... Remove it from the nozzle and replace. |
| | 4. Remove the two screws on the tank. | 5. Remove the outlet hose, which squeeze the bent antennae clamp pliers and slide the hose clamp, then remove the power steering reservoir from the vehicle. |
6. Install the parts in reverse order of removal.
|
